Vitocal 200-G 5.6 kW BWC.M 201.B06

You Save £2,822.82
£7,221.18 inc VAT

Vitocal 200-G.

Vitocal 200-G 5.6 kW BWC.M 201.B06 Refrigerant circuit with fixed heating output.
Heat pumps with electric drive for central heating and DHW heating in mono mode or dual mode heating systems.


  • Colour: Vitopearlwhite
  • Flow temperature up to 65 °C
  • Permissible operating pressure: Heating water 3 bar (0.3 MPa)
  • Low running costs thanks to high SCOP to EN 14825: up to 5.3 for average climatic conditions and low temperature application (W35)
  • Particularly low noise thanks to new sound insulation concept - up to 49 dB(A)
  • Mono mode operation for central heating and DHW heating
  • Low running costs with high efficiency due to refrigerant cycle diagnostic (RCD) system with electronic expansion valve (EEV)
  • Integral instantaneous heating water heater, e.g. for screed drying
  • Easy handling as the heat pump module can be quickly removed thanks to push-fit connections.
  • Optimised utilisation of power generated on-site by photovoltaic systems
  • Web-enabled via Vitoconnect (accessories) for operation and service using Viessmann apps.

Digital heat pump control unit.

Vitotronic 200 Type WO1C, for weather-compensated operation:

  • Cylinder temperature controller
  • Operation with user prompts
  • Integral diagnostic system
  • Control of an instantaneous heating water heater
  • Control of an additional oil/gas boiler
  • Cascade control for up to 5 Vitocal (requires accessories)
  • Control of compatible Vitovent ventilation units
  • Natural cooling control function (accessories required)
  • Swimming pool heating
  • Integral checking of the seasonal efficiency/energy statement
  • Optimised self-consumption
  • Extensions are required for every heating circuit with mixer, additional oil/gas boiler, cooling control function and swimming pool heating (see Accessories).

Standard delivery:

  • Brine/water heat pump in a compact casing
  • Built in 3-Way divert valve heating / hot water
  • Integral high efficiency brine circuit pump (primary circuit)
  • Integral high efficiency heating circuit pump (secondary circuit)
  • Integral instantaneous heating water heater
  • Safety assembly for the heating circuit
  • Weather-compensated Vitotronic 200 heat pump control unit with outside temperature sensor
  • Electronic starting current limiter and integral phase monitor
  • Connection pipes for flow and return of the brine circuit (primary circuit), heating circuit and DHW flow (secondary circuit) for connection at the top.
  • Integral E-Heating


Unit BWC 201.B06 BWC 201.B08 BWC 201.B010
Output 5.8kW 7.5kW 10.4kW
Performance COP 4.6 4.6 4.8
Seasonal Performance SCOP 4.8 5.2 5.3
Flow temperature 65°C 65°C 65°C
Length 680mm 680mm 680mm
Width 600mm 600mm 600mm
Height 975mm 975mm 975mm
Weight 145kg 145kg 145kg

Coefficient of performance (COP) at operating point B0/W35 to EN 14511 (05/2018) at rated heating output.
Seasonal coefficient of performance (SCOP) under average climatic conditions, low temperature application (W35) to EN 14825.

Buying into Viessmann.

Viessmann Vitocal heat pumps provide customers with the comfort and peace of mind of a free parts and labour repair service subject to the terms and conditions below and the warranty period of your heat pump.
During the period of the warranty, Viessmann will at their option, repair or replace a heat pump free of charge where it suffers a mechanical or an electrical breakdown as a result of defective workmanship or materials, subject to the following conditions and exclusions.

Warranty qualification requirements

For standard warranty of 2 years, you or your installer can register the installation, using the online option available at

Great Britain:

In order for your heat pump to qualify for a warranty longer than 2 years, your installation must be registered with Viessmann within 30 days, the model must be valid for a longer warranty and must be installed by a Viessmann Trained Installer.

For the sale of extended warranties, your heat pump installer must be registered as trained by Viessmann, your installer must register your installation within 30 days using the online option available and you must pay for the extended warranty.

Vitocal 200-G Standard Warranty Trained Installer Only Trained Installer Only
Standard 2 year warranty Standard 5 year warranty 7 Year warranty + £Fee

Viessmann Warranty Overview

We have placed cookies on your device to help make this website better.

Your Basket